Curing Oven 1.700 x 1.400 mm

GMR-GOS Dual Chamber Curing Oven 1.700 x 1.400mm

Dual Chamber During Oven 1.700 x 1.400mm (2.40m2)

Process area based on largest substrate;
4.1. Process area (minimal); 1.700 x 1.400mm (2.40m2)
4.2. Substrates are (non-) heat treated, (non-) TCO coated optical white (or standard)
float glass sheets with straight or pencil edges and (non-) edge delete patterns (1)
4.3. Substrates are rectangular shaped (2)


General
Electrical diagram (see appendix 1)
Main power supply voltage 3x400 ± 5% + earth, 50Hz ± 5%
Control voltage 230Vac 50Hz and 24Vdc
Main fuse 140A
Motor power
Circulation fan motor 2.2 kW (2 pcs.)
Drive motor vertical transport 0.39 kW
Drive motor horizontal transport 0.09kW
1.5.3 Heating system
Heating
Heating type Electric with closed tube elements
Power 30 kW per room
Codov T I Iqspfx Agferh


Overall, the system consists of two parts, viz:
- The furnace consists of two chambers each with an air circulation fan and adjustable air inlet.
- The conveying system consists of a trolley with vertical and horizontal movement.
The oven is suitable for curing heat treatments under air atmosphere with cleanroom classification in the temperature range from 50ºC to 250ºC. One heat cycle per chamber can be programmed. The cart can place glass from the conveyer position into one of the two chambers where the products undergo a selected heat cycle. And then removed from the oven and placed back in the conveyer position.