Wohlenberg Fgt Grapjhic Machinery - Cutting Machine gebraucht kaufen (82.660)

Zustand: gut (gebraucht), Baujahr: 2011, • Wohlenberg WB 92 TS cutting machine • Approx. 920 mm cutting width • Programmable control • Large stainless-steel working tables • Side tables • Waste / trim removal system • Conveyor system • Baumann material handling equipment • Baumann unloading equipment • Baumann jogging equipment • 4 cutting knives included The waste disposal / conveyor equipment is stated to date from approximately 2017. _____ BAUMANN PERIPHERAL EQUIPMENT The cutting system is complemented by professional Baumann handling equipment. Baumann Unit – Type BA 3N According to the machine plate: • Manufacturer: Heinrich Baumann • Type: BA 3N • Machine No.: 1322 • Voltage: 400 V / 3N~ • Frequency: 50 Hz • Rated current: 9 A • Power: 3 kW • Stated load: 1,000 N • Made in Germany The exact year is not shown on the visible nameplate. Unloading Equipment The unloading unit is stated by the owner to be approximately 10 years older than the main cutting machine. Jogging Table The Baumann jogging equipment is stated to be approximately 20 years older than the main cutting machine. These age indications are based on information supplied by the machine owner and should therefore be considered approximate. _____ INCLUDED TOOLING A particularly useful part of the package is the knife set: 4 x cutting knives included This reduces the buyer's initial requirement for additional cutting tooling and provides spare knife capacity for ongoing production. _____ WHY BUY THIS CUTTING LINE? Complete Production Package Instead of purchasing only a stand-alone guillotine, the buyer receives a complete cutting and material-handling solution with peripheral equipment. Proven German Technology Lhjdpfx Apsz Ei D Dopol Baumann and Wohlenberg equipment is widely used in professional printing and finishing operations and is known for robust mechanical construction. 920 mm Production Class The 92 cm cutting format is highly versatile and suitable for a wide range of commercial printing, digital printing, bookbinding and finishing applications. Material Handling Included The additional Baumann equipment can significantly improve workflow compared with operating a stand-alone cutting machine. Waste Handling & Conveyors Integrated peripheral systems help reduce manual handling around the cutting process and improve production organisation. Four Knives Included _____ SUITABLE APPLICATIONS The system can be used for: • Commercial print finishing • Digital print finishing • Bookbinding • Brochures and catalogues • Sheet cutting • Printed paper • Cardboard and light board applications • Short- and medium-run finishing • General post-press production _____ FGT VALUE – MORE THAN JUST A MACHINE Purchasing used graphic machinery internationally involves more than simply buying equipment. FGT Graphic Machinery can support the complete project from inspection through delivery. Our services can include: • Technical machine evaluation • Inspection coordination • Machine demonstration • Professional dismantling • Preparation for transport • Packing • Loading • International truck transport • Sea freight • Export documentation • Customs preparation • Installation coordination • Technical support _____

Baujahr: 2013, Zustand: gut (gebraucht), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm _____ Ljdpow E Iumefx Appehl

Zustand: gut (gebraucht), Baujahr: 2021, Manufacturer: Duplo Model: PFi Blade B3+ Year: 2021 Incoterm: FCA, Germany (free loaded onto truck) FGT Condition Rating: ★★★★★☆ (9/10) _____ Why this machine is interesting The Duplo PFi Blade B3+ is a compact and highly versatile digital cutting table designed for short-run and on-demand production. It combines cutting, kiss-cutting and creasing in a single operation, making it ideal for packaging prototypes, labels, greeting cards, folding cartons and digital print finishing without the need for conventional dies. Its CCD camera registration system ensures excellent accuracy, while the automatic feeder allows efficient unattended production. _____ Technical Data • Working size: 210 × 297 mm up to 400 × 600 mm • Material thickness: up to 1.3 mm • Paper weight: 120 – 400 g/m² (depending on application) • Cutting speed: up to 800 mm/sec • Cutting accuracy: ± 0.3 mm Lhjdpfx Apeznun Aepjl • Tungsten steel cutting blades • 3 tool heads: Cutting, Kiss-Cut and Creasing • CCD camera registration system • Automatic pile feeder with 5 combined suction heads • Feeder capacity: 100 mm • Power supply: 220 V / 50 Hz / 20 A • Connected load: 4 kW • Dimensions (L × W × H): 2,540 × 810 × 1,060 mm _____ Included Equipment • PC with monitor, keyboard and mouse • Cutting and control software • Permanent transferable software licence • CCD camera registration system • Three tool heads (Cutting, Kiss-Cut and Creasing) • Complete tool holders and accessories • Assorted spare blades • Operating manual and technical documentation • Data backup available • Separate vacuum table compressor included _____ Availability • Immediately available • Machine under power • Demonstration possible by appointment _____

Baujahr: 1984, Zustand: gut (gebraucht), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm Lhjdsycv Dvopfx Appel 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Baujahr: 2007, Zustand: gut (gebraucht), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: “Machine under power Lodpjxzr Hpsfx Appehl _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic register system: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Full automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Zustand: gut (gebraucht), Wohlenberg 115 TS Papierschneidmaschine Maschine in sehr gutem Zustand, sofort einsatzbereit. Baujahr: 2008. Sofort ab Lager verfügbar. Die Guillotine kann als eigenständige Einheit oder in Kombination mit Schneidsystemen eingesetzt werden. Die Programmierung erfolgt menügesteuert und umfasst verschiedene Schneidaufgaben, wie z. B. Einzel- und Mehrfachschnitt, Programmierung, Haltefunktion ohne Schneiden und automatische Übertragung des Ist-Wertes. Wohlenberg-Hochleistungs-Schneidmaschinen werden in Solms, Deutschland, hergestellt. Besondere Merkmale der Wohlenberg-Maschine: – Interaktive Benutzeroberfläche – 18,4-Zoll-Touchscreen – USB-Schnittstelle – Ethernet-Schnittstelle – Windows CE-Betriebssystem – Positionierung über elektronisches Handrad – Optimierter Schneidzyklus – Programmierbarer Anpressdruck – Automatische Anpassung des Anpressdrucks an die Schnittbreite – Automatischer, vorderseitig angeordneter Messerwechsel Lhedpfx Apozw Tzajpol – Schneller Messerwechsel – Neuer Maschinenkörper in einem Stück gegossen = erhöhte Stabilität – Wartungsfreie elektromagnetische Kupplung Technische Daten: Schnittlänge: 1150 mm Maximale Stapelhöhe: 165 mm Einspeisetiefe: 1150 mm Minimale Schnittkapazität bei Blech unter dem Druckbalken: 77 mm Minimale Schnittkapazität ohne Blech unter dem Druckbalken: 20 mm Maximale Geschwindigkeit des Vorschubs: 300 mm/s Maximale mechanische Effizienz, Messergeschwindigkeit: 44 Zyklen/Minute Vorschubbewegung: oberhalb des Arbeitstisches Leistung des Hauptmotors: 4 kW Nettogewicht: 3200 kg Die Maschine ist mit einem Ersatzmesser, Schneidleisten, einer Druckplatte, Dokumentation und Werkzeugen ausgestattet.

Baujahr: 2000, Zustand: gut (gebraucht), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Data: Max. sheet size: 740 x 1040 mm Min. sheet size: 350 x 400 mm Max. speed: 8,000 sheets/hour Max. cutting force: 250 tons Running hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (1 mm plates) C.U.B.E. system Stripping section Lhsdpfx Ajyz Adnjppsl 1 set of stripping frames (quick lock) including tools Non-stop delivery Condition: Machine is in good working condition Can be inspected in production upon request _____ Key Advantages: Reliable and proven BOBST technology Strong cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for fast job changeover Well-maintained machine with relatively low running hours _____

Zustand: neu, Funktionsfähigkeit: voll funktionsfähig, Baujahr: 2026, Steuerungsart: CNC-Steuerung, Lasertyp: Faserlaser, Laserquellenhersteller: Raycus, Laserleistung: 6.000 W, Laserwellenlänge: 1.070 nm, Arbeitslänge: 1.500 mm, Arbeitsbreite: 3.000 mm, Verfahrweg X-Achse: 3.000 mm, Verfahrweg Y-Achse: 1.500 mm, Vorschubgeschwindigkeit X-Achse: 80 m/min, Vorschubgeschwindigkeit Y-Achse: 80 m/min, Positioniergenauigkeit: 0,05 mm, Wiederholgenauigkeit: 0,05 mm, Eingangsspannung: 380 V, Eingangsfrequenz: 50 Hz, Art des Eingangsstroms: Drehstrom, Art der Kühlung: Wasser, Gesamtlänge: 2.610 mm, Gesamtbreite: 5.125 mm, Gesamthöhe: 2.128 mm, Ausstattung: CE-Kennzeichnung, Die WatMachinery ZMB1530 6kW ist eine Hochleistungs-Faserlaserschneidmaschine aus der ZMB-Serie, entwickelt für schnelle, präzise und zuverlässige Blechbearbeitung. Diese Version ist mit einer Raycus 6kW Faserlaserquelle sowie einem Schneidbereich von 3000 x 1500 mm ausgestattet und stellt damit eine leistungsstarke Lösung für Werkstätten und industrielle Produktionslinien zur Bearbeitung von Stahl, Edelstahl, Aluminium, Messing und anderen Metallen dar. Die Maschine verfügt über einen Raytools BS06K Schneidkopf mit Autofokus, Delta/INOVANCE Servoantriebe, Zahnstangenantrieb aus Taiwan, HIWIN/DTX Linearführungen, französisches Motovario-Getriebe und ein Cypcut-Steuerungssystem. Die robuste Maschinenstruktur umfasst einen schweren Maschinenrahmen, eine geschlossene Schutzeinhausung, automatische Schmierung, Industrieschaltschrank, Rauchabsauganlage und einen Industrie-PC. Sämtliche Komponenten sind auf höchste Positioniergenauigkeit, stabile Übertragungsleistung und langfristige Betriebssicherheit ausgelegt. Die ZMB1530 ist für den kontinuierlichen Industrieeinsatz konzipiert – mit 24-Stunden-Betrieb, einer Achsgeschwindigkeit von 80 m/min (X/Y) und einer maximalen Beschleunigung von 0,8G. Das Steuerungssystem unterstützt diverse Dateiformate, Fernbedienung, Echtzeit-Alarm- und Schutzfunktionen. Das Wasserkühlsystem gewährleistet einen stabilen Laserbetrieb und schützt die Maschine auch bei langen Produktionszyklen. Wie aus Materialbeispielen und Schneidtabellen der Broschüre ersichtlich, eignet sich die Maschine zur Bearbeitung von Kohlenstoffstahl, Edelstahl, Aluminium und Messing. Die ZMB-Serie ist konzipiert für Branchen wie Blechfertigung, Schaltschrankbau, Automobilkomponenten, Maschinenbau, Werbetechnik, Metallverarbeitung, Werkzeug- und Vorrichtungsbau sowie viele weitere Bereiche. Hauptvorteile: - Arbeitsbereich 3000 x 1500 mm - Raycus 6kW Faserlaserquelle - Raytools BS06K Autofokus-Schneidkopf - Cypcut-Steuerungssystem - Delta/INOVANCE Servomotoren / Antriebe - HIWIN/DTX Linearführungen - Taiwan YYC Zahnstangenantrieb - Französisches Motovario-Getriebe - Industrieller Wasserkühler - Geschlossene Schutzeinhausung - Automatisches Schmiersystem - Industrie-PC mit Bildverarbeitungssystem - Ausgelegt für 24h-Industriebetrieb Technische Daten Modell: ZMB1530 / ZM-Serie Laserquelle: Raycus Faserlaser Laserleistung: 6 kW Arbeitsbereich: 3000 x 1500 mm Wellenlänge: 1070–1080 nm Schnittstellen: USB, RJ45 X-Achse Verfahrweg: 3000 mm Y-Achse Verfahrweg: 1500 mm Z-Achse Verfahrweg: 100 mm Verfahrgeschwindigkeit (X/Y): 80 m/min Positioniergenauigkeit: ±0,05 mm/m Wiederholgenauigkeit: 0,05 mm Maximale Beschleunigung: 0,8G Stromversorgung: 380V / 50Hz Betriebsmodus: 24h Maschinengewicht: 3150 kg Maschinenabmessungen: 5125 x 2610 x 2128 mm Hauptkomponenten * Raycus-Laserquelle * Raytools-Schneidkopf * WatMachinery Maschinenrahmen und Portal * Taiwan YYC Zahnstange * Motovario-Getriebe (Frankreich) * Delta/INOVANCE Antriebe für X-, Y- und Z-Achse * HIWIN/DTX Linearführungen * Cypcut-Steuerung * HanLi-Wasserkühler * CHNT/Schneider Elektrokomponenten * CKD/SMC Pneumatikkomponenten * Rauchabsauganlage * Automatisches Schmiersystem * HP Industrie-PC * Geschlossene Maschineneinhausung Anwendungsbereiche Geeignet für: * Blechbearbeitung * Schaltschrankbau * Werbung und Beschilderung * Fertigung mechanischer Bauteile * Produktion von Großküchentechnik Lodpfx Ajyr D Nxeppohl * Automobilindustrie * Maschinenbau * Herstellung von Metallprodukten * Werkzeug- und Messtechn

Baujahr: 2016, Zustand: gut (gebraucht), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact but highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm class Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport Ledpfez Ea N Rox Appjhl • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Baujahr: 2019, Zustand: gut (gebraucht), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine -400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation provides excellent flexibility for short runs and frequent job changes, while full rotary production allows considerably higher speeds for longer production runs. This particular machine offers a very comprehensive configuration including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant additional value for the future owner. _____ MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ Ljdpfxoz Ea I Tj Appshl PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed to register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting within one machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents a considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling techn

Baujahr: 2018, Zustand: gut (gebraucht), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Suitable also for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm Ljdsz Ea Itjpfx Appjhl • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimise material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter ap

Baujahr: 2019, Betriebsstunden: 61 h, Zustand: gut (gebraucht), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours only Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle • Electronic web guiding system • Edge-reading web guide sensors • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colours • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Ledoz Ea E Sopfx Appehl Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 micron Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Zustand: gut (gebraucht), Baujahr: 2013, Funktionsfähigkeit: voll funktionsfähig, 9 color Flexo UV Lamination Turnbar Tooling Embosssing Rewinder Unwinder etc. Lsdpez Daaaofx Appshl

Zustand: gut (gebraucht), Baujahr: 2006, Funktionsfähigkeit: voll funktionsfähig, Arbeitsbreite: 330 mm, MPS Model: EF 330/8 Year of manufacture: 2006 Printing technology: UV Flexographic Printing Number of printing units: 8 colours Web width: 330 mm class Application: Labels / self-adhesive materials / film applications Condition: Very good operational condition Production status: Currently in daily production _____ PRINTING CONFIGURATION 8 x Flexographic Printing Units The machine is equipped with eight flexographic printing stations and offers a highly flexible production platform for professional label production. Suitable applications include: • Process colour printing • Spot colours • Varnishes • Special coatings • Paper labels • Film labels • Self-adhesive materials • Front-side printing • Reverse-side printing • Multi-process label applications _____ GEW UV DRYING SYSTEM The machine is equipped with a professional GEW UV curing system. The installed GEW UV technology provides reliable curing performance for UV flexographic inks and varnishes and is well established in industrial label production. The dedicated GEW UV power supply units are installed together with the press and form part of the existing production setup. Ledpfx Aozzym Reppshl _____ EXTENSIVE INLINE CONFIGURATION This MPS EF 330/8 is not simply a basic 8-colour flexographic press. Its extensive web path and additional inline modules provide a high level of flexibility for demanding label applications. The current configuration includes: • 8 flexographic printing stations • GEW UV curing system • Unwinding and rewinding system • Web cleaning system • Corona treatment system • Web guiding system • Turnbar / reverse-side printing capability • Inline lamination station • Rotary converting / die-cutting section • Longitudinal slitting equipment • Web / print inspection system • Electronic machine control • Extensive exhaust and extraction installation • Safety systems and emergency stops This configuration makes the press suitable for both standard self-adhesive label production and more complex multi-process applications. _____ TURNBAR / REVERSE-SIDE PRINTING A major advantage of this machine is the integrated turnbar and web turning configuration. his allows the material web to be turned during production and enables printing or processing on the reverse side of the substrate. This functionality is particularly useful for: • Backside printing • Multi-layer labels • Peel & reveal constructions • Promotional labels • Technical labels • Special label applications _____ INLINE LAMINATION . _____ WEB & PRINT INSPECTION _____ OPERATIONAL STATUS The machine is: ✓ Fully functional ✓ Currently in daily production ✓ Complete and professionally installed ✓ Available for inspection under production conditions ✓ Supplied with extensive tooling ✓ Suitable for professional label production A production test can be organised by prior appointment. _____ CONDITION Technical Condition ★★★★★☆☆ – 8 / 10 Overall Maintained Condition ★★★★★☆☆ – 8 / 10

Zustand: neuwertig (gebraucht), Baujahr: 2024, Funktionsfähigkeit: voll funktionsfähig, Ausstattung: Dokumentation/Handbuch, KONICA MINOLTA ACCURIOLABEL 230 Lhjdpfx Aezx Ri Deppol Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with an: Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Zustand: gut (gebraucht), Baujahr: 2010, Funktionsfähigkeit: voll funktionsfähig, GALLUS TCS 250 High-End Combination Label Printing Press Manufacturer: Gallus Model: TCS 250 Year of manufacture: 2010 Printing Configuration 8 Printing Units in total: • 6 x Offset Printing Units • 1 x Rotary Screen Printing Unit • 1 x Flexographic Printing Unit Additionally: • 1 x Flexographic Varnishing / Coating Station _____ MACHINE CONFIGURATION Printing Technology The machine combines three different printing technologies within one production line: 6 x Offset Ideal for: • High-resolution graphics • Fine text • Excellent halftone reproduction • Premium label applications • High-quality process colour printing 1 x Rotary Screen Printing Especially suitable for: • High-opacity colours • Opaque white • Special varnishes • Tactile effects • Functional coatings • Premium decorative applications 1 x Flexographic Printing Unit Provides additional flexibility for: • Spot colours • Solid colours Lhsdpfx Aozww Rreppol • Varnishes • Coatings • Special applications _____ FLEXO VARNISHING STATION The machine is additionally equipped with a dedicated: Flexographic Varnishing / Coating Station Suitable for applications such as: • Full-area varnishing • Protective varnish • Gloss varnish • Matt varnish • Special coatings This provides additional finishing possibilities directly in-line. _____ UV DRYING SYSTEM The machine is equipped with an integrated: UV Drying System The UV curing system allows fast and efficient curing directly after printing and coating. This supports high-quality production on a wide variety of label substrates. _____ CORONA TREATMENT Included: Corona Treatment Unit The Corona system improves surface tension and therefore ink and coating adhesion, particularly on filmic and non-absorbent substrates. _____ WEB GUIDING The machine is equipped with: Automatic Web Edge / Web Guiding System This ensures stable and accurate web transport throughout the complete printing and finishing process. _____

Zustand: gut (gebraucht), Baujahr: 2006, The machine is equipped with a highly flexible combination of different printing technologies: 8 Printing Untits • 5 x Offset Printing Units • 3 x Rotary Screen Printing Units • 2 x Flexographic Printing / Coating Units This combination makes the machine particularly suitable for sophisticated label production requiring several printing and finishing processes in one production line. Lodpfx Aozww N Uoppshl Included are, among others: • Numerous printing cylinders • Magnetic cylinders • Extensive anilox rollers • Printing and converting accessories • Screen printing equipment • Additional machine-specific tooling A detailed tooling list can be provided upon request, subject to final inventory. _____ COMPLETE MACHINE CONFIGURATION Printing at all 8 x Printing Units • 5 x Offset printing units • 3 x Rotary screen printing units • 2 x Flexographic printing / coating units Web Handling • Martin Automatic unwinder • Rewinder • Web guiding / web edge control • Corona treatment Drying • UV drying system Inspection • Camera / web inspection system Finishing & Converting • Flexo varnishing station • Rotary hot foil • Cold foil • Rinio embossing unit • Lamination system • Kocher & Beck rotary die-cutting Tooling • Printing cylinders • Magnetic cylinders • Anilox rollers • Screen printing accessories • Additional tooling and machine-specific accessories _____

Baujahr: 2008, Zustand: gut (gebraucht), ROTOFLEX VLI 330 Inspection – Slitting – Rewinding Machine Manufacturer: ROTOFLEX International Model: VLI 330 Year: 2008 Serial No.: VLI 3517 Working width class: 330 mm Electrical: 380 V / 50 Hz / 3 Phase Condition: Very good working condition Current status: Still in production Availability: Approx. 3 months, after installation of the owner's new finishing line BRAND-NEW INSPECTION TECHNOLOGY Lhjdszww Ikopfx Appol BST TubeScan – Installed / Replaced in 2025 The machine is equipped with a modern: BST TubeScan Digital Strobe 4000 Inspection System The complete camera / inspection system was replaced only in 2025 and is therefore almost new. This represents a considerable added value compared with many older Rotoflex machines currently available on the used machinery market. The system allows the operator to monitor the printed web during production and supports reliable quality control of finished labels. MACHINE APPLICATION The Rotoflex VLI 330 is designed for professional finishing and inspection of label material. Typical applications include: · Inspection of printed labels · Slitting of master rolls into finished rolls · Rewinding · Removal and correction of defective material · Quality control · Preparation of finished rolls for delivery · Processing of pressure-sensitive label materials · Paper and film label applications

Baujahr: 2006, Zustand: neuwertig (gebraucht), CODIMAG VIVA 340 Lhedshhfibjpfx Appjl Age: 2006 Unwinder Camera 12” and 14” IST UV dryer 5 x Letterpress 1 x Varnish Unit All 5 backpressure cylinder are new in 2021. Neue Rullers Flexo UV Varnish Unit Rotary Unit with Magnetic-Cylinder and more than 1000 Magentic cutting plates GAP-Master Rewinder Complete service history by CODIMAG In Germany , in production

Zustand: gut (gebraucht), Baujahr: 2014, XEIKON 3050 including front-end system Year of Manufacture: 2014 _____ Product Description:  Bar code module  Xeikon PMS-Large  Rewinder XRN 500 single shaft, Incl. Tension Control  Maintained: Gold maintenance contract  Operating hours: very low estimated max. 300h  Condition: As good as new Machine Specifications and Equipment:  Print Process: Electrophotographic with LED array, dry toner, rotary printing with variable print length  Color Configuration: 5/0 simplex (CMYK and White)  Color Control: Integrated densitometer  Toner: Xeikon QA-I  Resolution: 1200 x 3600 dpi with 4-bit LED spot  Print Width: 508 mm (20.0 inches)  Print Length: Variable, 0-55 m (0-180 ft)  Substrate Feeding: Roll-fed; suitable for paper, paperboard, self-adhesive or pressure-sensitive labels (paper, PP, PET, vinyl, co-extruded film), transfer substrates  Substrate Width: 250-516 mm (9.8-20.3 inches)  Substrate Weight: 40 to 350 gsm (27 lb text to 122 lb cover)  Substrate Thickness: 40 to 550 μm (1.6 mil to 21.65 mil)  Web Alignment: Active, based on infrared and ultrasonic sensors  Print Speed: 9.6 m/min (31.5 ft/min) _____ Accessories Included:  Manuals Lhjdpfov Iqimjx Appel  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Zustand: neuwertig (gebraucht), Baujahr: 2019, 3 x XEROX NUVERA 314 ➢ Type: Digitalprinting ➢ Manufacturer: XEROX ➢ Model: NUVERA 314 ➢ Year of construction: 2 x 12-2019 / 1 x 2016 ➢ Counter: 40mio / 42mio / 58mio ➢ Referenz Number: FGT 25-141 ➢ Rated speed: 314 ipm ➢ ➢ Resolution: 4800 x 600 dpi ➢ Paper Size: Min: 5.5″ x 8″, Max: 12.6″ x 19.3″ Lhsdpfx Apor Hcivepsl ➢ Paperweight: 44 gsm — 300 gsm

Zustand: neuwertig (gebraucht), Baujahr: 2019, GIC TAGINNOV SPEED ETIQ Year of Manufacture: 2019 _____ Product Description: A GIC RFID processing machine where the RFID is dispensed under the label where you want it. Machine Specifications and Equipment: Ledpfxov Iqg Ss Appjhl  Speed: 3 to 50 m/min.  Weight: 70 to 16gr  Label Width: 350 mm Maximum  RFID: wet  RFID width : 100 mm Maximum _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Baujahr: 1998, Zustand: gut (gebraucht), Funktionsfähigkeit: voll funktionsfähig, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: Exact year cannot currently be confirmed due to a damaged machine identification plate Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling through the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling Lhedpfx Apsztqrnjpjl • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Baujahr: 1996, Zustand: gut (gebraucht), Funktionsfähigkeit: voll funktionsfähig, GALLUS T 180 SCREEN AND LETTERPRESS LABEL PRINTING MACHINE WITH HOT-FOIL STAMPING, EMBOSSING AND FLATBED DIE-CUTTING We are pleased to offer the following versatile GALLUS T 180, designed for the production and finishing of high-quality narrow-web labels. The machine combines three screen-printing units with one letterpress printing unit, UV curing, hot-foil stamping, embossing and flatbed die-cutting. Thanks to the integrated unwinding and rewinding system, finished rolls can be produced directly within the machine in one complete production process. _____ MACHINE DETAILS Manufacturer: Gallus Model: T 180 Year of manufacture: 1996 Web width: 180 mm Printing processes: Screen printing and letterpress printing Printing units: 3 screen-printing units and 1 letterpress unit Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 3 screen-printing units • 1 letterpress printing unit • Suitable for high-opacity inks, solid colours and detailed print applications • Combination of screen and letterpress printing within one production line Drying System • UV curing system • Immediate curing of inks and varnishes • Suitable for direct inline finishing and further processing Varnishing • Varnishing capability within the letterpress printing unit • Suitable for protective and decorative varnish applications • Inline finishing without the need for an additional standalone varnishing machine Decorative Finishing • Hot-foil stamping unit Ljdpfx Apoztqp Tspshl • Embossing capability • Suitable for metallic, decorative and tactile finishing effects • Particularly attractive for premium and specialty label applications Web Handling • Unwinding unit • Rewinding unit • Controlled material transport through the complete production process • Finished rolls can be produced directly in the machine Die-Cutting • Flatbed die-cutting unit • Suitable for precise die-cutting of different label shapes and materials • Inline production from raw material to finished rolls _____

Baujahr: 2007, Zustand: gut (gebraucht), Funktionsfähigkeit: voll funktionsfähig, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit Ljdpfxeztqlze Appshl • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong colour coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multicolour labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimises intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.