FGT Graphic Machinery - Labelpress

OMET OMET FlexyServo 330 mm

Baujahr: 2021, Zustand: gebraucht, Funktionsfähigkeit: voll funktionsfähig, Automatischer Plotter zum Schneiden von Etiketten und Aufklebern von der Rolle VD 320 III Sehr wenig genutzt Die Maschine ist mit 4 Schneidköpfen ausgestattet Integriertes Führungssystem mit Führungswalzen gewährleistet einen präzisen Bahntransport während des gesamten Schneidprozesses Elektromagnetische (Pulver-) Bremse an Ab- und Aufwicklern sorgt für gleichmäßige Spannung, elektronische Regelung Kaltlaminierung mit einstellbarer Folienpositionierung zur Bahn Möglichkeit zum Schneiden und Separieren in Nutzen Tisch mit Vakuumunterstützung zum Verbinden der Bahn beim Rollenwechsel – minimiert Materialverluste Gitteraufwickler Touchscreen TECHNISCHE DATEN: Zuführungsart: Rolle-zu-Rolle / optional mit Guillotine Rolle-zu-Bogen Max. Arbeitsbereich der Messer: 320 x 400 mm Max. Rollendurchmesser: 450 mm Rollenbreite: 40-340 mm Etikettenschneidegeschwindigkeit: 6 m/min (bei 10 x 10 cm), abhängig von Art und Form der Etiketten Geschwindigkeit beim Schneiden in Rollen: bis zu 80 m/min Rcjdpfjxw Uqvox Ammod Schnittgenauigkeit: 0,2 mm Unterstützte Dateiformate: PLT Bahn-/Rollenbreite: 10-330 mm Lieferung inkl. Herstellersoftware Kompatibel mit Grafikdateien aus Corel Draw und Adobe Rotationsmessertyp: Wolframstahl Stromversorgung: 1~, 230V/50Hz Abmessungen: 158 cm x 90 cm x 136 cm Maschinengewicht: 450 kg

Zustand: gebraucht, Baujahr: 1997, Technical data: Material width: min. 130 mm, max. 270 mm Material width: max. 244 mm Print repeat length: min. 101.6 mm, max. 254 mm Machine components: • Corona treatment • 5 × offset printing units • 1 × flexo printing unit • Flat hot foil stamping unit • Flat die-cutting unit Redpfx Amsxpilremjcd

Zustand: gut (gebraucht), Baujahr: 2000,  Printing technologies installed: • 3 x Flexographic printing units • 3 x Screen printing units • Gravure capability (cylinder formats available) Maximum mechanical speed: 150 m/min Maximum web width: 417 mm Minimum web width: 166 mm Maximum print width: 407 mm Substrate thickness range: approx. 0.008 – 0.18 mm  Repeat ranges Flexo: (228.6 mm (Z72) up to 609.6 mm (Z192) Screen: 269.875 mm (Z85) up to 533.4 mm (Z168) Gravure: 304.8 mm (Z96) up to 609.6 mm (Z192)  Die Cutting Section  Flat die cutting:  Die cutting width: 407 mm - Repeat: 254 mm (Z80) up to 609.6 mm (Z192) Rotary die cutting capability installed. Unwind / Rewind Section Unwinder: • Martin endless unwinder • Core diameters: 76 / 152 mm • Maximum unwind diameter: 1000 mm • Maximum roll weight: approx. 485 kg Rewinder system installed. Electrical Data Nominal current: 500 A Connected load: 275 kW Rcedpoylypusfx Ammed General Condition The machine is designed for web label production and represents a solid hybrid combination press with flexo and screen capability. The press is available for inspection by appointment.

Zustand: gut (gebraucht), Baujahr: 2004, Funktionsfähigkeit: voll funktionsfähig, Produktbreite (max.): 500 mm, Angeboten wir eine EDALE Flexodruckmaschine mit insgesamt 8 Druckwerken und zwei Stanzeinheiten. Redjxhd A Aspfx Ammscd

Baujahr: 2001, Zustand: gut (gebraucht), Dear Ladies and Gentleman, we are proud to offer you following machine. You receive also the pictures of the machine so that you can see the very good condition of the machine. The offer is on condition of subject to prior sale: ROTOFLEX VLI 510 – Slitter Rewinder Rcodpfxowmf A Do Ammed General Information: • Brand: Rotoflex • Model: VLI 510 • Year of Manufacture: 2003 • Condition: Good working condition • Availability: Immediately Technical Specifications: • Web Width: 510 mm • Functions: o Slitting o Rewinding • Rewind Diameter: Up to 700 mm • Unwind Diameter: Up to 750 mm • Core Sizes: 3" • Slitting System: Razor blade • Minimum Slit Width: 12 mm • Web Path: Roll-to-roll • Counting Options: Label and length counting • Drive System: Servo-driven • Web Guiding System: Included Application: Ideal for slitting and rewinding of self-adhesive labels, films, foils, and other flexible materials. • Condition: Regularly serviced and well-maintained _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment)

Zustand: neuwertig (gebraucht), Baujahr: 2011, OMET Varyflex VF1 Year of manufacture: 2011 Web width: 850 mm Printing process: Flexo + Rotogravure combination line Condition: Used – very good condition Location: Europe _____ Machine Configuration • 8 x UV flexo printing units (equipped with new UV lamps, LED-ready) • All flexo units ATEX execution (suitable for solvent-based inks) • 1 x rotogravure unit (solvent / water-based compatible) • 1 x die-cutting unit (530 mm) • In-line slitting system • Double turret rewinder Rjdpfjyyn Hfox Ammscd • Turn bar (web turning system) • Hot air dryer on first printing unit • Cold seal trolley (movable) • Cold foil unit (cassette type, positionable on any unit) _____ Equipment & Tooling • Extensive anilox roller package • Sleeve system (well maintained condition) • Tooling in very good condition Optional (available upon request): • Omet plate mounter • Bimec slitter rewinder 1200 mm (almost new condition) _____ Technical Highlights & Advantages The OMET Varyflex VF1 is a highly versatile production platform designed for both label and flexible packaging applications. Key advantages: • Wide web format (850 mm) – ideal for high-volume production • Hybrid configuration (flexo + rotogravure) for maximum flexibility • ATEX design allows use of solvent-based inks • LED-ready UV system for future energy efficiency upgrades • Modular configuration with movable units (cold foil / cold seal) • Excellent condition with recently updated electronics (PLC, drives, control cabinets) • Proven application: previously used for polythene-coated materials (80–90 g/m²), ensuring reliability in demanding environments This machine offers an outstanding balance between performance

Zustand: gebraucht, Baujahr: 2011, Web Width: 850 mm 1. Unwinding and Infeed System Unwinder with constant web tension control Web alignment and stabilization unit Electronically controlled infeed with precise tension management Complete drive system for accurate web handling 2. Rewinding System Single-shaft rewinder, max diameter: 1000 mm Constant tension control for stable winding 3. Surface Treatment & Web Cleaning Corona treatment unit for surface energy optimization (pre-print treatment) ACE single-side contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section 8 flexo printing units with: Print drum Removable inking drawer (excluding anilox rollers) Optional features for flexo units: Explosion-proof configuration (applied per printing unit) Drum cooling system Lightweight anilox rollers: 5 units (195–300 lpi) with gear 5 units (>300 lpi) with gear 24 printing sleeves with cams 2 additional ink drawers (tray + rubber roller) 1 trolley for ink drawers (3 slots – 2 active + 1 spare) Special Flexo Units 1 cold foil trolley 1 sliding cold foil unit (movable to any print station, rail-free design) Rotogravure Printing Section 1 rotogravure unit for front-side or reverse-side printing, equipped with: Tilting bar for reverse (back) printing Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) Rotogravure trolley for mobile positioning Extended hot air drying system: “Super Hood” with 32 high-efficiency blowers Heating via methane gas burner Integrated cooling unit Electrostatic assist system for ink transfer 3 rotogravure printing formats (16”–26”) Solvent ink viscometer Pump and ink supply tank 5. Drying and UV Curing Systems 8 UV curing units, 22 kW each, one per print station Integrated cooling system for UV lamps Drum cooling for temperature-sensitive substrates 6. Die-Cutting and Finishing Units Rotary die-cutting unit, working width up to 530 mm Base for die-cutting station Trim removal system (up to 530 mm width) Scrap pressure system (limit 530 mm) 7. Slitting Section Scissor-type slitting system 6 Helios box-type knives with self-sharpening counter blades 8. Electronic Control & Inspection OMET electronic register control for 8-color operation Includes “gate” function for precise registration Vision system for real-time print inspection Rsdey Ey Niepfx Ammecd Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance Complete CE-compliant safety guarding and emergency stop systems Designed for ergonomic operation and quick format changes

Zustand: gut (gebraucht), Artikel: D-1717-Fischer Etikettierer Rcedsidmvropfx Ammod Fischer Etikettier-Doppel-Etikettiermaschine Montage an Edelstahlrahmen. Einstellbare Position der Etiketten. Transportband 1600 x 200 mm. Etikettierung von oben und von der Seite des Produkts! Etikettenbreite max. 100 mm Sensor gelesen Stationiert in Dänemark!

Baujahr: 2022, Zustand: gut (gebraucht), Manufacturer / Model Grafotronic DCL2 550 Serial Number 220520G Web Width 550 mm Year of Manufacture Location Germany Condition Used – in production CE Marking Yes _____ Main Configuration Unwinder Module • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat) • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat) • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) Rcsdpfxexq A Hlo Ammjd • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials • Foil 30–250 µm • Paper 100–250 µm _____ General Condition overall in good working order. According to the printer, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional. _____

Baujahr: 2006, Zustand: gut (gebraucht), ABG Digicon 1 Year of manufacture: 2006 Machine type: Label converting and finishing machine Condition: Used – good working condition Location: Germany Technical Configuration  Die-cutting station – 152 teeth  Semi-rotary operation possible  Full rotary operation possible  1 UV curing unit Redpfsyrg Rfsx Ammjcd  1 air dryer  Lamination unit installed  Cold foil possible (rollers missing)  Crush knife slitting system Equipment • 1 anilox roller – 140 lines / volume 8.5 • 2 printing cylinders • 4 lacquer cylinders • 4 ink trays • 1 extra fountain roller • Core holders: – 2 × core 40 mm – 2 × core 45 mm – 4 × core 76 mm Application and Advantages The ABG Digicon is a well-known converting platform designed for efficient label finishing. It is suitable for: • Rotary and semi-rotary die cutting • Varnishing and coating applications • Lamination processes • Slitting and rewinding Thanks to its flexible configuration, the machine allows label converters to efficiently perform finishing operations after printing, increasing productivity and reducing handling steps. ABG is recognized worldwide as a specialist in finishing and converting equipment for the label industry, known for precision engineering, reliability, and long service life.